If we’re out of DigQuad Controllers, try the International Store: Here
If you want to buy the DIg-Quad and power supply and build your own Controller you can find them here. We do not sell the relay and smaller power supply at this time but
We do not sell the Relay and the small power supply at this time but here are links
We will have a link to a power supply shortly
Each Box of Track comes with thirteen 45.25 inch tracks, with 23 12mm holes for pixels and 39 Mounting Brackets. Why 49 Feet and not 50 feet? To keep 2 inch spacing between the tracks as well as keeping the track an easily manageable length that is the length that works. When ordering the track we suggest at least 10% over what you think you need as you will have overage and if you order to the exact foot you will probably end up short
If you are Local and want to come pick it up
Use Coupon Code: UTAHPICKUP
at checkout to save on shipping cost of boxes of track only
After purchase, write us at [email protected] to arrange your pick up.
If you enter this code and don’t come pick it up we’ll have to cancel your order. Then we will be sad.
As of DEC 12th… Whit Bottom is IN Stock
——————————————————————————————————-
Short Pixel Strings, 12v WS2811, with Mini Xconnect connectors on each end.
One of these Pixel Packs gives you the exact number of LEDs you need for One Box of Permatrack. These short pixel strings make each section of Permatrack modular, so you can load the pixels in the track before climbing up on the ladder.
If, for example, you order 4 boxes of track, you should order 4 of these pixel packs.
We have a Limited Quantity of this Aluminum Puck Lighting Track
(15) 1 meter tracks per box
4″ Spacing
12v Puck Lights are included
RGBW
Works with WLED-based Controllers
YES! We finally have been an All-in-One ready to run control box
Prewired with a DigQuad, Power Supply, Power cord, LED pigtails and more
All set up for testing your lights as you install them! Just plug it in and connect your lights
WE ARE GETTING THESE IN WEEKLY… IF IT SAYS OUT OF STOCK IT WILL BE VERY SOON
Showing all 17 resultsSorted by price: high to low
If we’re out of DigQuad Controllers, try the International Store: Here
If you want to buy the DIg-Quad and power supply and build your own Controller you can find them here. We do not sell the relay and smaller power supply at this time but
We do not sell the Relay and the small power supply at this time but here are links
We will have a link to a power supply shortly
We have a Limited Quantity of this Aluminum Puck Lighting Track
(15) 1 meter tracks per box
4″ Spacing
12v Puck Lights are included
RGBW
Works with WLED-based Controllers
YES! We finally have been an All-in-One ready to run control box
Prewired with a DigQuad, Power Supply, Power cord, LED pigtails and more
All set up for testing your lights as you install them! Just plug it in and connect your lights
WE ARE GETTING THESE IN WEEKLY… IF IT SAYS OUT OF STOCK IT WILL BE VERY SOON
Each Box of Track comes with thirteen 45.25 inch tracks, with 23 12mm holes for pixels and 39 Mounting Brackets. Why 49 Feet and not 50 feet? To keep 2 inch spacing between the tracks as well as keeping the track an easily manageable length that is the length that works. When ordering the track we suggest at least 10% over what you think you need as you will have overage and if you order to the exact foot you will probably end up short
If you are Local and want to come pick it up
Use Coupon Code: UTAHPICKUP
at checkout to save on shipping cost of boxes of track only
After purchase, write us at [email protected] to arrange your pick up.
If you enter this code and don’t come pick it up we’ll have to cancel your order. Then we will be sad.
As of DEC 12th… Whit Bottom is IN Stock
——————————————————————————————————-
Short Pixel Strings, 12v WS2811, with Mini Xconnect connectors on each end.
One of these Pixel Packs gives you the exact number of LEDs you need for One Box of Permatrack. These short pixel strings make each section of Permatrack modular, so you can load the pixels in the track before climbing up on the ladder.
If, for example, you order 4 boxes of track, you should order 4 of these pixel packs.
We know it says free shipping but we hope to have that changed soon. Free Shipping is for orders $200.00 or more
If you live in CANADA We will bill you for any additional shipping cost over what we built into the cost of the product for shipping in the US
Free Shipping is only for orders of $200.00 or more
Sold only as part of a Permtrack Kit
If you order a controller without ordering Track or Light Kits we’ll have to Cancel your order. Sorry.
If we’re out of stock, try the International Store: Here
(Free Shipping on Orders over $200)
Free Shipping is only for orders of $200.00 or more
Free Shipping is only for orders of $200.00 or more
When you need to order extra track and need lights for it. This string of lights is enough for one track. If you ordered a 19′ Box you will need to order 5 of these Strings
Free Shipping is for orders of $200.00 or more
The Fastest and Easiest way to make splices!
These are genuine ClickIts
Created by the geniuses at ExperienceLights
You don’t even have to strip the wires.
Just cut, separate, feed the wire tips in, and Click It!
Free Shipping is only for orders of $200.00 or more
Free Shipping is only for orders of $200.00 or more
Length: 12 Inches
Format : Mini Xconnect
These are not compatible with normal Xconnect connectors. They are much smaller
(Free Shipping is for orders > $200) These are intended to be sold with Pixels and/or Permatrack
For longer runs between you lights you may need the help of a Data Extender. When placed between lights strings with a distance of 6 – 10 Feet or more the Data extender acts as a Null Pixel and renews the Data Signal and sends it on to the next Light String.
Free Shipping is only for orders of $200.00 or more
No products in the cart.