Puck Track + 24V RGBW Lights (~49.2′ per box)
$382.00We have a Limited Quantity of this Aluminum Puck Lighting Track
(15) 1 meter tracks per box
4″ Spacing
12v Puck Lights are included
RGBW
Works with WLED-based Controllers
Showing 1–20 of 32 resultsSorted by price: high to low
-
-
Puck Track + 12V RGBW Lights (~49.2′ per box)
$349.00We have a Limited Quantity of this Aluminum Puck Lighting Track
(15) 1 meter tracks per box
4″ Spacing
12v Puck Lights are included
RGBW
Works with WLED-based Controllers
-
Sale!
24V Ready to Run Control Box
Original price was: $339.95.$299.95Current price is: $299.95.PLEASE DO NOT CHANGE THE SETTINGS… It is ready to run. The ONLY time to change a setting is to put the correct number of Lights for each output. We are getting a lot of support emails because people are messing around with other settings after they get it. If you do this the warranty could be void.
If you need to RE Flash your controller DO NOT USE THE LATEST VERSION… please go HERE to reflash it.
Includes:
1 – Weatherproof Box
1 – Dig-Quad (WLED) Controller
1 – 24v, 600 watt, 25 amp Meanwell power supply
1 – 1 amp 5v power supply (to run the Dig-Quad)
1 – Relay to shut down the main power supply while not in use
4 – Mini xConnect Female Pigtails one for each output on the Dig-Quad
1 – 6 Foot 120v power cord
3 – Mini xConnect two pin pigtails for Power injectionAlready set up for testing your lights as you install them! Just plug it in and add your lights.
After install all you have to do is follow the normal WLED instructions to join it to your network and input the number of lights on each output.
Settings are set to RGB and 600 lights on 4 outputs with a pattern playing on start up.
This makes it MUCH easier to install your Permatrack system. Once your lights are all up, just adjust the number of lights per output and you are done
(Pictures may or may not look exactly the same as the product you receive)
-
12V Ready to Run Control Box
$289.95Prewired with a DigQuad, Power Supply, Power cord, LED pigtails and more
All set up for testing your lights as you install them! Just plug it in and connect your lights
WE ARE GETTING THESE IN WEEKLY… IF IT SAYS OUT OF STOCK IT WILL BE VERY SOON
-
PermaTrack ~ 49′ Pack Aluminum
$200.00Each Box of Track comes with thirteen 45.25 inch tracks, with 23 12mm holes for pixels and 39 Mounting Brackets. Why 49 Feet and not 50 feet? To keep 2 inch spacing between the tracks as well as keeping the track an easily manageable length that is the length that works. When ordering the track we suggest at least 10% over what you think you need as you will have overage and if you order to the exact foot you will probably end up short
If you are Local and want to come pick it up
Use Coupon Code: UTAHPICKUPAfter purchase, write us at Sales@Permatrack.us to arrange your pick up.
If you enter this code and don’t come pick it up we’ll have to send an invoice for the discount before we can send it out.Select options This product has multiple variants. The options may be chosen on the product page -
Puck Track + 24V Puck RGBW Lights (19.6′ per box)
$152.95(6) 1 meter tracks per box
4″ Spacing
24v RBGW Puck Lights are included
Works with WLED-based Controllers
-
Puck Track + 12V Puck RGBW Lights (19.6′ per box)
$139.95We have a Limited Quantity of this Aluminum Puck Lighting Track
(6) 1 meter tracks per box
4″ Spacing
12v RBGW Puck Lights are included
Works with WLED-based Controllers
-
Sale!
24V Pixel Pack
Original price was: $149.95.$134.95Current price is: $134.95.Free Shipping is only on orders $200.00 or more.
Thirteen 23 Light Pixel Strings, 24v, WS2811, with Mini Xconnect connectors on each end.
One of these Pixel Packs gives you the exact number of LEDs you need for One Box of Permatrack. These short pixel strings make each section of Permatrack modular, so you can load the pixels in the track before climbing up on the ladder.
If, for example, you order 4 boxes of track, you should order 4 pixel packs.
-
12V Pixel Pack
$134.95Free Shipping is only on orders $200.00 or more.
Thirteen 23 Light Pixel Strings, 12v WS2811, with Mini Xconnect connectors on each end.
One of these Pixel Packs gives you the exact number of LEDs you need for One Box of Permatrack. These short pixel strings make each section of Permatrack modular, so you can load the pixels in the track before climbing up on the ladder.
If, for example, you order 4 boxes of track, you should order 4 of these pixel packs.
-
PermaTrack ~ 19′ Pack Aluminum
$99.95We know it says free shipping but we hope to have that changed soon. Free Shipping is for orders $200.00 or more
If you live in CANADA We will bill you for any additional shipping cost over what we built into the cost of the product for shipping in the US
Things you’ll also need: Get it all in a Bundle
- Single string of lights for to fill one track You will need to order 5 of these Strings for the 19′ Box
- WLED Wifi Controller
- 12v Power Supply
- 3 Conductor 18g Wire
- Quick and Easy “Click-it” Connectors
- For 3d Corners and other accessories for Permatrack Click Here
- Extra Mounting Brackets: each box comes with 39
- Data signal amplifier: f-amp
Select options This product has multiple variants. The options may be chosen on the product page -
Wifi-LED Controller Dig-Quad External Antenna (Not for Sale Individually)
$89.95Free Shipping is only for orders of $200.00 or more
Sold only as part of a Permtrack Kit
If you order a controller without ordering Track or Light Kits we’ll have to Cancel your order. Sorry.If we’re out of stock, try the International Store: Here
- Picture is just a representation. All Products are Dig-Quads but may not look exactly like the picture
- Dig-Quad is an ESP32-based, addressable LED controller.
- Comes with External Antenna for extended Wifi coverage
- Comes with the latest version of WLED pre-installed.
- Detailed Wiring instructions
-
Meanwell 24V Power Supply
$54.95Free Shipping is only for orders of $200.00 or more
- 24v 600 watt 24 AMP Power Supply
- High Quality MEAN WELL brand
-
25′ Three Core Power and Data Mini xConnect Extension 4 Pack
$42.40These 25′ Extensions help you get Power and Data from the controller to your first pixel
-
100′ Two Core Power injection Extension
$41.95100 Foot Power injection extension.
NO DATA. Just Power and Ground
Pigtails on each end for easy installation
You may have to cut off the female end to tie it into the older Pixel pack strings that only have two wires instead of a Pigtail at the end of light strings
-
Sale!
LED Wire 100 Foot
Price range: $33.95 through $41.95(Free Shipping on Orders over $200)
- 100 ft of 18g 3-conductor wire
- ideal for use with Permatrack & Pixels
- 3 Different Colors
- Black Round case option for longer runs
Select options This product has multiple variants. The options may be chosen on the product page -
Meanwell 12V Power Supply
$36.95Free Shipping is only for orders of $200.00 or more
- 12v 350 watt (29amp) Power Supply
- High Quality MEAN WELL brand
-
75′ Two Core Power Injection Mini xConnect Extension
$32.95These 75′ Extensions help you get Power to your Power injection spots
-
50′ Two Core Power injection Extension
$24.9550 Foot Power injection extension.
NO DATA. Just Power and Ground
Pigtails on each end for easy installation
You may have to cut off the female end to tie it into the older Pixel pack strings that only have two wires instead of a Pigtail at the end of light strings
-
12 Inch Mini Xconnect Pigtail pair 4 Pack
$19.50Free Shipping is only for orders of $200.00 or more
Length: 12 Inches
Format : Mini XconnectThese are not compatible with normal Xconnect connectors. They are much smaller
-
24 Volt Lights for Single Track
$13.50Free Shipping is only for orders of $200.00 or more
When you need to order extra track and need lights for it. This string of lights is enough for one track. If you ordered a 19′ Box you will need to order 5 of these Strings